L E D S not working one my crome 360 controler

Alex1 · #1 01-12-2009, 08:33 PM

Hi every one!!! so fare i like this site and everyone has been nice .. but i have a question... if bought a crome case with leds (blue).. i gust got done wit it about 2 weekes aggo and i turned it on and the leds are not working AT ALL.. i pressed the light triger at the top.. and i alsotook is apart again to see if there was any pinched wirs... NONE ... so now im stuck i solder the right wirse to geather i think.... if some one has the instilation guid one how to put togeather it .. that whould be great.. e mail me at alexlefever@rocketmail.com if you have anyhitng that could help me ..o and i saw they had a thing one the home page that whould make you lights birghter .. does anyone thinks that that whould help ...??? again email me if you got an i deya

Thanks!!!

Alex,,

TeamXCM · #2 01-12-2009, 08:40 PM

Did the lights work ok when you first put it together? If so then its got to be something else. First thing is try some fresh alkaline batteries, not a rechargeable battery pack, but fresh AA alkaline batteries. If that doesn't help, give us abit more info and we'll try to help the best we can. The controller cases with leds are really simple to install so it can't be much that could be wrong. Theres 3 wires at the most, so it shouldn't be too hard to troubleshoot.

Alex1 · #3 01-12-2009, 08:50 PM

ok .. i didnt try the aliline batteries i will try that now...... i always use the rechagible but ok...

TeamXCM · #4 01-12-2009, 09:49 PM

Let us know how it turns out.

TeamXCM · #5 01-13-2009, 02:00 PM

First of all did the led lights ever work? If so then we need to approach this differently. Secondly which version of controller pcb do you have, v1 or v2? Let us know and we'll try to help the best we can.

Alex1 · #6 01-13-2009, 02:05 PM

ok .. i have no clue its the Eleat controller.. is ther anyways to tell if it is the v1 or v2? and it did not work ever....

TeamXCM · #7 01-13-2009, 02:51 PM

You should have known what version it was before soldering the wires. Did you solder wires to the pcb of your controller?

TeamXCM · #8 01-13-2009, 02:52 PM

http://www.teamxcm.com/forums/xbox-3...ard-scans.html

This thread will help you determine if you have v1 or v2.

Alex1 · #9 01-13-2009, 03:02 PM

ok mine is the v2.. .. ........

Alex1 · #10 01-13-2009, 03:03 PM

o and what is the pcb??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)