L E D S not working one my crome 360 controler - Page 2

TeamXCM · #11 01-13-2009, 03:12 PM

Download the instruction set from here for your controller and then make sure the wires are going to the correct locations, they are different for v1 and v2.

Alex1 · #12 01-13-2009, 03:56 PM

ok well it is not lettiong me i triyed it before .....

i will search it up on the internet.. for now till you get back to me

Alex1 · #13 01-13-2009, 04:57 PM

i think i got everything miuxed up on the thing that is conected to the crome with the bumbers already atached.. well i looked and i have the 360JYM not the 360JY...... does that make a diferance???? i so then what.....

Alex1 · #14 01-13-2009, 04:58 PM

also i looked at how to installl the wires and i had the black and the whits mixed up... i looked at what you posteded about how to instal leds

TeamXCM · #15 01-13-2009, 05:03 PM

Go ahead and get the wires straigtened out and it should work for you. Let us know how it goes.

Alex1 · #16 01-13-2009, 05:25 PM

OK... one thing though you know were the bumbers are already attached to the motherboard that is conected to the crom case well i have the 360JYW not the 360JY
... when i looked at how to put togeather the leds for the v2 it had the 360JY not 360JYW ... its the thing you posted on how you put together not someone elses ... does that make a difference... if you now what i mean..... thanks

TeamXCM · #17 01-13-2009, 05:34 PM

As long as you are sure you have a v2 controller case, by comparing the pic, you should be fine.

Alex1 · #18 01-13-2009, 08:00 PM

ok thank you.. i will let you know how it works out...

Alex1 · #19 01-15-2009, 08:21 PM

thank you sooo much it works well.. the start button is not as bright as the rest but its kool!!!!!... i will look at it and posibly get the thing that makes the leds lighter...