Help with Gear Pro

[scrapman]

Installed the Gear pro and tilt function works great. The rapid fire works on all but two buttons. The Right button will light up, but not work, and the left trigger will not do anything.

What can I check? Please help.

[TeamXCM]

Which right button are you talking about, you mean the right bumper or trigger?

[scrapman]

The button above the right trigger, it lights up but otherwise does not function. The left trigger does nothing also.

[TeamXCM]

You will need to make sure you didn't cut a trace next to where the left trigger is tied into the yellow pcb, it will be lt1 and lt0. Also check to make sure you have good solder connection on the right bumper, also check the continuety to make sure the wires aren't damaged.

[scrapman]

Thanks,
I'll check those out!

[njvw]

Is there a step by step quide to install the gear-pro? I got a general idea how to install it with the instuctions and checked out your color manual. But a step by step with each wire would put make me more confident that I'm not messing it up.

[njvw]

Never mind I already finished it.