Install Issues with Rapid Fire Pro.

[iamfoesho]

I just got done with the whole install and I am having 2 issues. My first issue is that I can no longer move left to right on the the left thumb stick and my RB button no longer works. I can tilt left to right and up to down perfectly fine but do not know whats wrong. Can someone point me to the the right direction or trace I might have cut. Thank You.

[kronikdaddy]

I am having a similar issue, I have everything working except my left stick, Sometimes it just wont do anything and when it does respond it pulls to the left. If i press LB on the controller in the dash it will move to the right any direction i press the stick then let go of LB and it goes back to doing nothing. I have checked all my joints and used a strong magnifying glass to check traces were cut. I have a V2 controller.

Every thing else seems to work, Turbo and tilt sensor. Also sometimes the A button will work when i bring up my blades menu but wont do anything on the main dash, Other times it works fine. When A isnt working i cn see the A button light up on the dsh but it wont do anything.


Any ideas?

[TeamXCM]

You just have to recheck the points again, theres not much else you can do other than try it on a fresh controller, which may be the best option if you cannot get it to work.

[iamfoesho]

I am still need of help fixing this issue! Anybody in the Nor Cal area willing to take a look at it?