Cross Battle Adapter PLUS repair

[EX33396948]

So my Cross Battle Adapter PLUS has had issues connecting and I think there is a problem at the top of the USB head. I've talked about this on a flash forum and their solution was to either:

A) Cannibalize a USB cable, cut the heads off both, solder the wires, heat wrap and play

B) Open the Adapter, apply heat and remove the wires, re-solder a USB cable to where I removed the wires, close the cross battle adapter.

I don't know where I put the recite (or if I even got one) when I purchased mine but I do know it's less than (or JUST at) a year old. Not sure where my "warranty" stands but I'm guessing if I open it it'll be void (if it isn't already expired).

So my questions are:

1) Has anyone had this issue?
2) Anyone have any advice?
3) What can XCM do for me on the matter (besides sell me the new 2.0)?

and I guess

4) If all else fails, how much is a PLUS today and how much is a 2.0
AND
5) What are the differences between a 2.0 and my PLUS?

[EX33396948]

Thanks for the replies.

Anyways, I've since bought a CBA 2.0 and it works like a charm (after you open it, and place a formed piece of plastic inside to prevent the S-button from sticking).

I'm being careful with the wire this time around to extend it's life. I'm really posting this because I looked for my thread just as I heard some issues with PS3's 3.50 update. Apperantly some PS2 adapters and some Frag-N-stein's aren't working. I'll edit this and tell you if mine is or isn't working in a few minutes.

::EDIT::
It works, no issues