 Still have flickering lights
I was able to get a yellow wafer from a guy I know who only used the new board one. PITA having to drive an hour through the snow, but I did, replaced the one with the curls ribbon cable, and it works great accept as soon as you add a battery pack, the center 3 lights flicker brightly. Not sure if I have it grounded properly or what the deal is. Anyone else have this happen? I always tell people I install XCM controller shells for to remove batteries when not using anyways, but it is kindof annoying and obviously a flawed install.
When I have it settled, I will be submitting my own little guide for the old board style.
I also wanted to add, if you prefered a sexy red, green, or even clear, the board in the top half of the shell is completely interchangeable with other XCM shells with lights.
And whats with that previous post!?
|