Actually, there is some bad news about the right trigger. When cutting the trace on the pcb there is another trace right next to it that you cannot see unless you have a microscope, if that trace is damaged, its really hard to fix. The thread with the tips on how to install it that i started several months ago in the guides section will show you what i mean. If you damage the trace next to it the right trigger will not work and basically that controller is useless. The best thing to do is grab a microscope, make the cut on that one trace with a new controller and go on from there.
__________________
Official & Recommended XCM Product Retailers: Extreme-Mods.com - Based in the USA - Best Price Guarantee!
|