Quote:
Originally Posted by TeamXCM  As stated in the thread that has many helpful tips on installing this case, you may need to use a microscope to see the traces to be sure they are cut properly and that the one next to it is not cut. There is also a pic of the most troubling trace which is next to the capacitor for the right trigger where it ties into the yellow wafer pcb. Imo that trace is the hardest and takes alot of patience to get right. Many people have successfully installed these cases so it can be done, but it is not easy and does take alot of time to perform. If you are not good at troubleshooting then this mod is not for you, but if you can troubleshoot and can get access to the right tools, then this mod is definately doable. It might very well be the hardest mod i've ever had to install personally, but the end result is second to none. It is by far the cleanest and best functioning rapid fire mod on the market to date. If you cannot install the mod with the triggers we suggest using the easy install instructions as only 3 connection are needed for the face buttons to function (A,B,X,Y). But if you are confident in going further then you do so at your own risk. |
I'm sorry, did you say MICROSCOPE?