 Cutting traces
You mention not to cut the traces by the trigger but the instructions say you are supposed to cut the traces. I folowed the instructions online to the T and I have been through 3 controllers. First one the right trigger didnt work, second the left, and the 3rd neither trigger. I think your instructions are very vague and leave alot to be desired. I decided to try a V1 controller, again following the instructions to the T and now the controller wot even power up.
I'd like to know how others are following the instructions with no problem yet I have so many. I am not new to soldering or working inside controllers and have already done several controller mods.
|