[crisdo98]

Hi there,
I'm trying to install a Rapid fire lite into a V2 controller... install went sweet and really happy with it.

All buttons work as they should except both RT and LT? They don't respond at all.

I've checked all the wiring with a multi-meter and for the life of me I don't know what's up.

On the flexicable near where it says VCC there is 2 solder pads... should these be bridged?

Also I noticed on the clip where the flexi cable plugs into that pin 10 and 11 appear to be bridged.. is this how it should be? The soldering on the clip looks quite poor and I'm almost gonna blame this for the issue unless someone can provide any suggestions.

More then happy to put up some pics