Thread: XCM Rapid Fire Gear Lite
View Single Post
  #2  
Old 01-18-2009, 12:18 PM
TeamXCM's Avatar
TeamXCM TeamXCM is offline
Administrator
  
Join Date: Jan 2009
Location: USA
Posts: 356
Default
Double check the soldering and make sure the traces are cut properly with a microscope. You can get a cheap microscope at radio shack for about $10. Also check continuity with the wires and make sure there are no cold solder joints.
__________________
Extreme-Mods.com - Based in the USA - Best Price Guarantee!

Search Engine Optimization & Web Solutions
Reply With Quote